To setup server direct print follow the below steps
First of all switch on the printer, Once power on printer will print IP Address settings. Like shown in below.
1. Go to Twirll Portal and follow the steps given below:
Admin >> Manage IOT Device
- #1. Go to Admin
- #2. Go to “Manage IOT Device” from the side bar
- #3. Select Web printer
2. Copy the “Spool request URL”.
3. Go to browser, and open your printer server config (http://IP address/webconfig) Like shown in example below.
- e.g. http://192.168.29.66/webconfig
4. If you are asked to log in – the login details are
- Username: “ epson ”
- Password: “ epson ”
5. You will be taken to this configuration page.
- Under the Printer configuration select “Direct Print”.
- And then paste the copied “Spool request URL” as marked in the below image.
Now Save the change.
Now server direct print is configured.
Check the below links for printer setups